任意进行图形化组态
SIMATIC TDC 可通过基于 Windows 的图形化 SIMATIC 工具 STEP 7、CFC 和 SFC 进行组态。软件包 D7-SYS 通过用于 SIMATIC TDC 以及高性能操作系统的函数块,对 CFC 组态工具加以补充。
全局数据存储器
为了完成复杂自动化任务,可能需要在多个机架中的 CPU 间交换数据。为此,可将一个全局数据存储器 (GDM) 用作连接多 44 个机架的中央存储器。
通过这个存储器,可在系统内多个机架中的所有 CPU 之间交换数据。这意味着,在一个系统中可使用多 800 个 CPU。
GDM 包含一个机架,在该机架中,仅可插入 GDM 模块。因此,可以一种特殊和极为快速的方式对该 GDM 进行操作。
维护和调试
维护和调试工作将直接通过图形化组态界面 STEP 7 和 CFC 完成。
其他处理器模块的程序
用于 SIMADYN D 模块 PM5 及PM6 的CFC、用于 FM 458-1 DP 应用模块的 CFC 或用于工艺模块 T400 的 CFC,可以非常方便地传输到自动化系统 SIMATIC TDC 的 CPU。
PC 与 MPI 和 PROFIBUS 的连接组件
下面描述的组件用于将编程设备和 PC (包括便携式 PC)连接到 PROFIBUS 和多点 SIMATIC S7 MPI 接口以及 STEP 7。
USB A2 PC 适配器
用于通过 USB 接口将 PC/便携式 PC 和 SIMATIC 编程器/PC 连接到 SIMATIC S7 自动化系统。
用于连接至 USB 1.1、2.0 和 3.0 接口。
从 USB 接口供电
PROFIBUS 接口,高达 12 Mbps
支持路由
自动传输速率和程序文件搜索
可在 Windows XP SP2 以上操作系统中运行
从 Windows 7 起,也可以用于 64 位系统
供货范围:
USB A2 PC 适配器
含有 PC 适配器 USB A2 的驱动程序的 CD
USB 电缆
MPI 电缆,0.3 m。
CP 5612
用于将 PC 和 SIMATIC 编程器/PC 连接到 PROFIBUS(传输速率高达 12 Mbps)和 SIMATIC S7 的 MPI 接口
PCI 卡(通用键控 5 V/3.3 V)。
Spare parts kit
This kit comprises four I/O terminals, one RS485 terminal, two pairs of Control Unit doors (1 × PN and 1 × other communication versions) and one blanking cover.
Set of connectors
A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the SINAMICS G120C converter.
Roof-mounted fan
A roof-mounted fan (at the top of the device) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.
Fan unit
A replacement fan (at the rear of the device; heat sink) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.